Do not stack this product. Edgestone is an edging product and is not designed to be stacked as a retaining wall.
Does Pavestone make 90-degree corners in Edgestone?
Pavestone doesnΓÇÖt have 90-degree corners for the Edgestone. If you need to make a 90-degree corner it can easily be made with a 3 in. masonry chisel and a hand sledgehammer. Just score the Edgestone on all 4 sides with the chisel and sledgehammer. Then put the chisel on the score mark and hit it a few more times and it should split. Once it is split in two pieces, you can place one of the split pieces on either the left or the right side of the other split piece to form the 90-degree corner. Cuts can also be done with a guillotine splitter but for more precision cuts a circular saw with a masonry blade is recommended. Caution: Always wear protective eye-gear when splitting stones.
How small a tree ring can I make with the Edgestone?
The smallest tree ring that can be made with the Edgestone is approximately 6ΓÇÖ diameter. That would be 18 pieces of Edgestone. In PavestoneΓÇÖs Materials Estimating Help Book there are calculations for any number of tree ring sizes already figured for you, all the way up to and including a 10 ft. diameter tree ring. Many of the more popular sizes have been calculated for you and are available online; go to http://pavestone.com/retail/edging-edgestone.html and select HOW MUCH DO I NEED.
Can Edgestone be laid right on top of the ground?
It is recommended that you dig a trench and install your Edgestone at a minimum of 1 in. in the ground and most applications 2 in. to 3 in. in the ground for the best use of the product. Edgestone can be buried in the ground almost level with the yard so that you can ride your lawnmower wheel on top of it and use it as a mow-strip.
How high can I go with the Estate Edge product?
Estate Edge is designed to be stacked only three layers above the ground, which would be approximately 11 in. Along with that it is also required that one additional layer be totally buried in the ground which would make a total of four (4) layers.
How small a tree ring can I do with the Estate Edge?
The smallest tree ring that can be built with the Estate Edge is a 4 ft. diameter or 2 ft. radius tree ring. It will take approximately 18 pieces to build the 4 ft. diameter tree ring and 1 additional piece for every layer below that, up to 4 layers. In PavestoneΓÇÖs Materials Estimating Help Book you will be able to see charts that give you calculations for straight line applications as well as tree ring applications up to 15 ft. in diameter. Some of the more popular sized projects have been calculated and this information is available online; go to http://pavestone.com/retail/edging estate-edge.html and select HOW MUCH DO I BUY. Most tree rings will require the cutting of one or more stones to fit.
What size tree ring can I do with the RoaminΓÇÖ Edge?
Because of the design of the RoaminΓÇÖ Edge, there is only one tree ring size that can be built, and that is a 36 in. diameter tree ring. The number of pieces that will be needed to build a 36 in. diameter tree ring will be 18 pieces.
Can I stack the Roamin' Edge to do a raised flowerbed?
It is recommended that you do not stack the RoaminΓÇÖ Edge for making a raised flowerbed. What is recommended is that you build your raised flowerbed with the Estate Edge. RoaminΓÇÖ Edge is designed as a single layer edging for doing straight, curved, and serpentine type edging.
